This SmallRig 1138 camera clamp review looks at a compact mounting option for creators who want to position a camera or accessory without drilling into a surface.
Its integrated clamp, ball head, and included action camera adapter suit lightweight setups, provided the combined load stays within its 1.5 kg capacity.
SmallRig 1138 Clamp Review Summary
The quick verdict

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A compact clamp and ball-head mount for creators who need to attach lightweight cameras or accessories to rods, tubes, tables, or frames.
- Clamp-and-ball-head mount intended for attaching camera gear to rods, tubes, tables, frames, or tripods.
- Uses a 1/4-inch-20 screw to connect compatible cameras and accessories.
- Includes an action camera mount adapter alongside the super camera clamp.
- Maximum stated weight capacity is 1.5 kg; suitability depends on the full mounted setup.
Pros
- Combines a clamp, adjustable ball-head positioning, and a 1/4-inch-20 connection in one mount.
- Can attach to several kinds of existing supports, including tables, tubes, rods, and frames.
Consider before buying
- The 1.5 kg maximum capacity sets a clear ceiling, so it is best suited to compact gear and lighter accessories.
- Fit depends on the support surface and the attached gear's connection; check both before choosing it for a specific setup.
Read the full review summary
The SmallRig 1138 pairs a clamp with an adjustable double ball-head connection and a 1/4-inch-20 screw.
It can attach compatible cameras, monitors, lights, microphones, webcams, or action cameras to a rod, tube, table, frame, or tripod, making it useful when a regular tripod is awkward or takes up too much room.
Its appeal is the straightforward, compact arrangement: grip a suitable support, position the attached gear, then tighten the locking knob.
Aluminum and stainless steel construction and a stated maximum capacity of 1.5 kg make it a candidate for smaller accessories.
Buyers should check the support's shape and diameter, the accessory's connection, and whether their shooting situation calls for a safety rope.
The buying factors
SmallRig 1138 Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp is designed for rods, tubes, tables, frames, and tripods, while the 1/4-inch-20 screw supports a range of small camera accessories.
Position adjustment
The double ball-head arrangement allows adjustment of the attached gear's position before tightening the locking knob.
Accessory compatibility
The mount is specified for cameras, webcams, monitors, lights, microphones, and action cameras, and includes an action camera adapter.
Load range
The stated maximum is 1.5 kg, a practical limit that points toward compact cameras and accessories rather than heavy rig components.
Build materials
Aluminum and stainless steel are used in the clamp's construction, with non-slip threads and an anti-twist structure described as part of the design.
Setup convenience
Clamping to an existing support avoids drilling, and the locking knob provides a direct way to secure the positioning.
Key Features and Specifications of SmallRig 1138 Clamp
- Clamp-and-ball-head mount intended for attaching camera gear to rods, tubes, tables, frames, or tripods.
- Uses a 1/4-inch-20 screw to connect compatible cameras and accessories.
- Includes an action camera mount adapter alongside the super camera clamp.
- Maximum stated weight capacity is 1.5 kg; suitability depends on the full mounted setup.
- Constructed from aluminum and stainless steel, with non-slip threads and an anti-twist structure.
- Listed dimensions are 3.74 × 3.35 × 0.98 inches, and listed weight is 0.2 kg.
- For dynamic scenarios, the product guidance calls for attaching a safety rope to help guard against an accidental drop.
Pros and Cons of SmallRig 1138 Clamp
Pros
- Combines a clamp, adjustable ball-head positioning, and a 1/4-inch-20 connection in one mount.
- Can attach to several kinds of existing supports, including tables, tubes, rods, and frames.
- The included action camera adapter broadens the types of small camera gear it can accommodate.
- Aluminum and stainless steel construction is paired with non-slip threads and an anti-twist design.
Consider before buying
- The 1.5 kg maximum capacity sets a clear ceiling, so it is best suited to compact gear and lighter accessories.
- Fit depends on the support surface and the attached gear's connection; check both before choosing it for a specific setup.
- Dynamic use calls for a safety rope, adding a separate setup step when the mount may be in motion.
Who Should Buy SmallRig 1138 Clamp?
Good fit
Consider the 1138 if you need to place a small camera, action camera, monitor, microphone, or light on an existing rod, tube, table, frame, or tripod.
The clamp format can be useful on a desk or in a vehicle when a conventional tripod is inconvenient, while the ball head provides a way to adjust the gear's angle after attachment.
It may also suit creators who value a compact kit with the action camera adapter included.
Before buying, compare the clamp's intended support with the surface you plan to use, confirm that your accessory can connect through the 1/4-inch-20 screw or supplied adapter, and keep the complete load under the 1.5 kg maximum.
For any moving or dynamic setup, plan to use a safety rope as advised. That makes the 1138 a more considered choice for controlled positioning than a mount you intend to attach and forget during motion.
Who should skip it
Skip this clamp if your setup exceeds its 1.5 kg maximum or requires a mount designed for heavier rig components. Confirm the weight of the complete gear assembly before relying on it.
Look elsewhere if your support surface cannot be gripped securely by a clamp, or if your camera needs a different mounting connection and you do not have a compatible adapter.
SmallRig 1138 Clamp: fit, load, and setup
A clamp for flexible placement
The 1138 is built around gripping an existing support rather than requiring a dedicated stand or drilled mounting point.
Its listed support types include rods, tubes, tables, frames, and tripods, so its usefulness comes down to whether the chosen surface offers a compatible, secure place to clamp.
This makes it an appealing option for compact desk or vehicle arrangements where positioning matters and floor space is limited.
Positioning and connection
The double ball-head setup gives the mounted accessory room to be aimed before the clamp is locked. A 1/4-inch-20 screw provides the main connection, and the package includes an action camera adapter.
Buyers should match their specific camera or accessory to that connection and check that the resulting angle clears nearby equipment before tightening everything in place.
Respecting the load limit
The maximum stated capacity is 1.5 kg.
Treat that as the upper boundary for the mounted assembly, including the camera or accessory and anything attached to it, and allow for a comfortable margin in a setup that may be bumped or repositioned.
The product guidance specifically recommends a safety rope for dynamic scenarios, a useful reminder when the support or camera may move during use.
Materials and daily handling
Aluminum and stainless steel form the described construction, while non-slip threads and an anti-twist structure are intended to help the clamp hold its position.
Those design details suit repeated adjustments, but a reliable setup still depends on choosing a support that fits and tightening the locking knob carefully.
The listed 0.2 kg weight makes the clamp relatively compact to include in a small camera kit.
Alternatives to SmallRig 1138 Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 Magic Arm Clamp Kit
Choose the 1138 when you want a compact clamp and ball-head mount with an action camera adapter.
The 2732 is a better fit if you need a longer reach between the support and accessory or specifically want both 1/4-inch and 3/8-inch clamp threads; verify its listed jaw range against your support.
- The 2732 pairs a super clamp with a separate 9.8-inch articulating arm.
- It has 1/4-inch and 3/8-inch threads on the clamp, 1/4-inch screws at both arm ends, and a stated jaw range from 15 mm to 54 mm.
- The 1138 combines its clamp and double ball-head positioning in a compact mount, with a stated maximum capacity of 1.5 kg and an included action camera adapter.
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig 4103 Double Clamp Mount
The 4103 may suit a setup that needs two clamping points or a higher stated load capacity, especially on a compatible rod.
The 1138 is the simpler choice for a single mounting point and a lighter accessory, with its included action camera adapter.
- The 4103 uses two clamps, supports rods from 14 mm to 60 mm in diameter, and lists a maximum load capacity of 3.5 kg.
- Its double ball head allows 360-degree rotation.
- The 1138 attaches to a support with one clamp and has a stated maximum capacity of 1.5 kg.
Is SmallRig 1138 Clamp Worth It?
The SmallRig 1138 Super Camera Clamp is worth considering for creators who need an adjustable, compact way to mount lighter camera gear on an existing support.
Its clamp, double ball-head connection, 1/4-inch-20 screw, and included action camera adapter cover useful small-rig arrangements without requiring a drilled mount.
Keep the 1.5 kg capacity in view, confirm that both the support and accessory fit your setup, and use a safety rope for dynamic scenarios.
If those conditions suit your use, the 1138 offers a practical mounting option for desk, vehicle, or other compact camera setups.
Your review at a glance

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A compact clamp and ball-head mount for creators who need to attach lightweight cameras or accessories to rods, tubes, tables, or frames.
- Clamp-and-ball-head mount intended for attaching camera gear to rods, tubes, tables, frames, or tripods.
- Uses a 1/4-inch-20 screw to connect compatible cameras and accessories.
- Includes an action camera mount adapter alongside the super camera clamp.
- Maximum stated weight capacity is 1.5 kg; suitability depends on the full mounted setup.